I usually get a lot of questions from faculty related to setting up their Brightspace courses. In the spirit of starting the semester with less stress, I offer the following infographic with course design suggestions to reduce your course setup and management stress:
Note: Are you doing something innovative in Brightspace or perhaps you've discovered a handy tip? Share how you are using Brightspace in your teaching and learning in The Orange Room.
Faculty can request to have two or more of their courses combined into a single course. Combining courses can be useful when you are teaching multiple sections of the same course or when you are teaching a course that is cross-listed. Merging courses allows you to have all the students in a single Brightspace course which can be useful for collaborative work. Merging courses reduces the number of courses an instructor has to manage within Brightspace, especially when each section has identical content.
Once your courses are merged, you can upload your course content and assignments into the merged course; communicate with the students in the merged course; setup collaborative course work; and have one Grade Book for the merged course. You can create groups within your merged course that correspond to the original course sections. This way you can target a particular course section (group) of students for specific things (e.g. send email to a specific group, make content available to specific group, enter/view Grade Book entries for a specific group, etc.)
NOTE: Merging of courses is typically done at the start of the semester before content is added and before students submit course work. You should wait to request your courses be merged if there is a possibility that there will be last minute changes to instructor course section assignments. You can request a Master Course Shell to build your course and then transfer the content into your merged course.
You should carefully consider whether merging courses is right for you. Some disadvantages to merging courses are:
Course enrollments for the merged courses will be combined which can make grading student work a challenge. If you create groups for the different sections, you will be able to view your Grade Book by groups to make grading easier.
Only one due date and start/end date can be assigned to an assignment, discussion, quiz, etc. Therefore you will not be able to assign different due dates and start/end dates to the activity (e.g., assignment, quiz, discussion, etc.).
If you decide you want to unmerge courses after students have submitted course work, student work and grades will be lost. Only student enrollments are retained when courses are unmerged.
Follow these steps to do it.
A system administrator will have to merge your courses. Send an email to Yamlak Tsega (ytsega@xula.edu) if you want to merge courses. You should include the course ID (including CRN) for all the courses you want merged together.
NOTE: When courses are merged, one of the existing courses will serve as the "merged" course. If all the course sections are empty, it won't matter which one is used as the "merged" course. If you have already created content in a course, you should request that the course with the content be the "merged" course. This will reduce the need to copy content.
Note: Are you doing something innovative in Brightspace or perhaps you've discovered a handy tip? Share how you are using Brightspace in your teaching and learning in The Orange Room.
Image credit: "why merge" by jflorent is dedicated to the public domain under CC0 and is a derivative of merging by Clker-Free-Vector-Images from Pixabay
As you prepare to teach this spring, now is a good time to get started setting up your Brightspace courses. Our Information Technology Center (ITC) has created the spring courses in Brightspace.
NOTE: You should see your spring courses in the My Courses widget. The July Continuous Delivery Updates implemented the updated My Courses Widget sort logic. If you do not see your spring courses in your My Courses widget, you should click on the link to "View All Courses" (located at the bottom of the My Courses widget). Verify that you are listed as the instructor for the course in Banner.
To get started, you can post your syllabus, course documents, announcements, and setup your Grade Book in your Brightspace courses. You can also customize your course homepage and/or course image/banner.
If you teach a course that is cross listed you will have a Brightspace course for each cross listing. You can combine the cross listed courses into one Brightspace course so that you can post course materials and grades to one combined Brightspace course. Combining courses may also work for you if you are teaching different sections of the same course and would like to have the different sections combined into one Brightspace course so that you can post course documents and grades in the one combined course. The beginning of the semester is the best time to submit a request to merge your Brightspace courses before you add course materials or grades to the courses.
Additionally, if the spring course you are teaching is the same as one of your previous courses you can copy the entire course (or copy components) into your "empty" Brightspace spring course.
Note: Are you doing something innovative in Brightspace or perhaps you've discovered a handy tip? Share how you are using Brightspace in your teaching and learning in The Orange Room.
D2L (the company that owns Brightspace) uses Continuous Delivery to update our Brightspace system. The Continuous Delivery model gives us regular monthly updates allowing for incremental and easily integrated changes with no downtime required for our Brightspace system.
Our Continuous Delivery update occurs on the 4th Thursday of each month. D2L provides release notes to help users stay up-to-date with the changes.
Here are a few updates in the December 2021/20.21.12 release that were added to our system this month:
1) Assignments – New assignment creation experience universally enabled
This feature adds a new hotkey shortcut in the Brightspace Editor to access the source editor. Previously, the source editor was unavailable by a hotkey shortcut.
The hotkey shortcut is:
Windows: Ctrl+Shift+E
Mac: Command+Shift+E
This feature addresses the following accessibility criteria:
WCAG 2.1 Success criterion 2.1.4 Character Key Shortcuts
3) Brightspace Learning Environment – Alerts in the minibar persist for 90 days
With this release, when you click on the Message alerts, Subscription alerts, or Update alerts icons in the minibar, you can retrieve alerts from the last 90 days. Previously, all alerts disappeared after 7 days.
The way these alerts display to users has not changed: when you click one of the icons, the 5 most recent alerts appear in the dropdown. When you click Load More, 5 more alerts appear.
4) Content – Updated count and overdue badges
In the Classic Content tool for instructors and learners, the count and overdue badges in the Table of Contents now reflect an updated appearance that is consistent with the New Content Experience and other Brightspace tools. The new count badge is circular (for single digits) or a capsule (for double-digits), with a grey background, and with higher contrast text. In addition, the overdue badge is now circular (for single digits) or a capsule (for double-digits). Previously, the count badge was rectangular, with a white background, and grey text/outline. The overdue badge was rectangular and red.
This feature addresses the following accessibility criteria:
The new count and overdue badges in the Classic Content toolThe old count and overdue badges in the Classic Content tool
5) Course Import/Export – Import and export intelligent agents
With this release, administrators and instructors can now include intelligent agents when importing or exporting courses. This allows administrators and instructors to share the dynamic notification interactions in imported/exported courses with other Brightspace instances. Previously, intelligent agents were not included when importing or exporting courses.
6) Email – Address Book changes to To/Cc/Bcc options
This feature changes the Email tool's workflow when selecting an email recipient in the To, CC, and/or Bcc fields. Each of these fields in the Compose window are now links that, when clicked, launch an Address Book dialog to select recipients from. Once a user or users are selected, they are added to the respective field.
Each of the three fields (To, CC, and Bcc) have their own separate links.
This feature also affects the Intelligent Agents tool; when users create a new Intelligent Agent, they can select the Send an Email option. Users then click the Address Book button next to each To, CC, and/or Bcc fields to choose the recipient(s). In effect, the changes made to email above are also reflected in the Intelligent Agents tool.
Under the previous workflow, users would have to select Address Book, select a recipient or recipients from the list by clicking the checkbox, and then selecting the Add Recipients button. The existing Address Book button remains unchanged; users can continue to use the old workflow.
The layout of Compose Email window prior to the updateThe layout of Compose Email window after the update
7) Quizzes – Improved language terms
To offer more intuitive and consistent terminology to instructors and learners when using Quizzes, many interface labels and dialogs now use more descriptive language. For example, Automatic Grade is now Automatically Publish Evaluation. Previously, many interface labels and dialogs used short terms that did not provide clear meaning for some users.
For a detailed list of all language term updates in Quizzes, see the Quiz Language Updates blog post.
Note: Are you doing something innovative in Brightspace or perhaps you've discovered a handy tip? Share how you are using Brightspace in your teaching and learning in The Orange Room.
As we approach the end of the semester there are a few things you can do in Brightspace to wrap up for the semester.
Release final course grades
Unlike other grade items and categories in the Grade Book, final grades are not available to students by default. Final grades must be released. If you did not choose to enable the automatic release of final grades when setting up your Grade Book, you will have to manually release final grades in order for students to see their final grade.
Export your Grade Book
Student access to courses is removed two weeks after the end of a semester. This process of making the courses inactive allows student work and grades to be visible to instructors but students no longer have access to the course. Courses will remain on the Brightspace system for three semesters before they are removed. You should export (download) your Grade Book to your local computer after you submit your final grades.
NOTE: The export file that is created will NOT contain any student work or instructor feedback. Only the grades in your Grade Book will be exported.
Create a master copy of your course
Courses remain on the Brightspace system for three semesters before they are removed. You can request a Master Course Shell that you can use to develop and maintain your course materials. Master Course Shells will not be removed from the Brightspace system.
Note: Are you doing something innovative in Brightspace or perhaps you've discovered a handy tip? Share how you are using Brightspace in your teaching and learning in The Orange Room.
Photo Credit: "end" by jflorent is dedicated to the public domain under CCO and is a derivative of image by Clker-Free-Vector-Images from Pixabay
Brightspace calculates final grades for each student based on the grading system and the students' grades that are entered into the Grade Book. If the instructor wants more control over the final grades, perhaps to adjust the final grade for a student that is on the cusp of a higher grade, then adjusted final grades can be used and released to students instead of the calculated final grade.
If the instructor decides to use adjusted final grades for one student in the course, adjusted final grades must be used for all students in the course. This does not imply, however, that final grades must be manually adjusted for all students.
Adjusting final grades are implemented by the instructor for only the student or students that are deemed to need an adjusted grade. The remaining students final grades would be the final grade as calculated in the Grade Book.
Note: The Grade Book must be configured to use adjusted final grades. If you plan to use adjusted final grades, you should make the adjustments before you release final grades.
Follow these steps to do it.
To adjust final grades for all students:
Get into the course where you want to adjust final grades and click Grades in the NavBar.
Click on the Enter Grades link.
Scroll over to the Final Calculated Grade column and click on the arrow on the right of the column name and select Enter Grades.
In the Final Adjusted Grade section for each student, enter the adjusted grades and then click Save.
Once you have ensured that students' grades are accurate, you can release the final grades.
To adjust final grades for one or more specific students:
Get into the course where you want to adjust final grades and click Grades in the NavBar.
Click on the Enter Grades link.
Scroll over to the Final Calculated Grade column and click on the arrow on the right of the column name and select Enter Grades.
Click on the arrow on the right of the Final Grades and click Transfer All, then click Yes.
In the Final Adjusted Grade section, enter adjusted scores where necessary and click Save.
Once you have ensured that students' grades are accurate, you can release the final grades.
Note: Are you doing something innovative in Brightspace or perhaps you've discovered a handy tip? Share how you are using Brightspace in your teaching and learning in The Orange Room.
Unlike other grade items and categories in the Grade Book, final grades are not available to students by default. Final grades must be released. When setting up the Grade Book, the instructor can choose to automatically release final grades so that the students can see their final grade throughout the semester. If you did not choose to enable the automatic release of final grades when setting up your Grade Book, you will have to manually release final grades in order for students to see their final grade.
Additionally, you can selectively release final grades for some students now and release the final grades for other students later. For example, you can release the final grades for graduating seniors on one date and release the final grades for everyone else on a later date.
Follow these steps to do it.
To manually release final grades:
On the NavBar, click Grades.
On the Enter Grades page, from the Final Calculated Grade or Final Adjusted Grade context menu, click Grade All.
To release grades for all users, on the Final Grades page, from the Final Grades context menu, click Release All. To release final grades for a specific user, do one of the following:
Select the check box by the user name and click the Release/Unrelease link.
Select the check box in the Release Final Calculated Grade or Release Adjusted Final Grade column.
Click Save.
OR watch this video for instructions on how to release final grades:
NOTE: There is a slight change in the video instructions. The "Enter Grades" option should be used anywhere in the video where "Grade All" is referenced.
Note: Are you doing something innovative in Brightspace or perhaps you've discovered a handy tip? Share how you are using Brightspace in your teaching and learning in The Orange Room.
Image credit: "final grades" by jflorent is dedicated to public domain under CC0 and is a derivative of grade by OpenClipart-Vectors on Pixabay
D2L (the company that owns Brightspace) uses Continuous Delivery to update our Brightspace system. The Continuous Delivery model gives us regular monthly updates allowing for incremental and easily integrated changes with no downtime required for our Brightspace system.
Our Continuous Delivery update occurs on the 4th Thursday of each month. D2L provides release notes to help users stay up-to-date with the changes.
Here are a few updates in the November 2021/20.21.11 release that were added to our system this month:
1) Brightspace Editor – Additional support for drag/drop and copy/paste images
This functionality is now available in user-specific areas that may contain images with learner-sensitive information. As a result, these images are stored in the database rather than the Manage Files area of a course offering. In addition, the Course Copy function does not include these images.
2) Content – PDF inline viewer menu improvements
This feature updates the PDF Inline viewer used when showing all converted documents (e.g. Word documents) as PDFs within Brightspace Classic Content. As a result the PDF inline viewer menu has moved to the top of the PDF document, along with PDF navigation and actions and an overall refreshed button design.
The new PDF in-line viewer with the menu bar at the top of the PDF viewer when viewing an original PDF.
3) Email – Increased Limits for To and CC Fields
This feature increases the number of email addresses that can be added to the To and CC fields in a single email to 200. This is a result of increased limits on the size of headers in Brightspace SMTP servers.
Previously, the limit was 50 email addresses.
4) Manage Files – Users receive warning message when uploading a file blocked due to security
This feature provides the user with a warning message if they attempt to upload a file with an extension that is either not allowed by the Assignment or is on the security restricted list. This message appears as "This file extension is not allowed." for Assignments; and as "This file extension is not allowed for security reasons. Please see our Restricted File Extensions article in the D2L Community for more detailed information." for security restricted file extensions.
The warning message displayed when attempting to upload a security-restricted file extension.The warning message displayed when attempting to upload an assignment with a restricted file extension.
Note: Are you doing something innovative in Brightspace or perhaps you've discovered a handy tip? Share how you are using Brightspace in your teaching and learning in The Orange Room.
Instructors can create surveys in Brightspace and use the statistics tools to monitor current course trends, seek opinions, and assess user satisfaction.
Surveys are an excellent way to solicit feedback from learners regarding any aspect of a course. You can gather anonymous or non-anonymous opinions and information from users. Unlike Quizzes, survey questions do not have to have right or wrong answers and Likert-style rating questions are possible.
Some examples of the types of uses for surveys are: seeking feedback on the effectiveness of active learning exercises, the need for clarification of course material, and/or seeking suggestions for course improvement.
On the NavBar, click Activities, then click Surveys.
On the Manage Surveys page, click New Survey.
Enter a Name and select additional settings for your survey (e.g. choose the option to give instant feedback and/or make results anonymous).
To add questions directly to the survey, click Add/Edit Questions. Alternatively, you can add questions from the Question Library.
Click Done Editing Questions to return to the survey page.
Click the Restrictions tab to modify the survey's availability.
Uncheck the Hide from Users checkbox.
Specify a date range for the survey, if appropriate.
Set the attempts allowed for the survey.
Click Save and Close.
To track survey progress and results:
Based on how you have set up the survey properties, you might see a list of all users or just the overall survey results with anonymous responses.
On the NavBar, click Activities, then click Surveys.
On the Manage Surveys page, click the context menu next to the name of your survey and click Statistics.
In the Users tab, search for users and their listed attempt types. You can restrict your search of survey results by attempt in the Attempts tab.
To view a specific user's results, click on an individual attempt. To view the number of attempts per question within a survey, click View Overall Results at the bottom of the page.
Note: Are you doing something innovative in Brightspace or perhaps you've discovered a handy tip? Share how you are using Brightspace in your teaching and learning in The Orange Room.
The Discussions tool has a new @mentions feature. Within the Discussion tool, users can now tag other users within the same course using @mentions. Tagged users are notified by alerts in the Minibar directing them to the thread in which they were tagged. Additionally, users can edit their notification settings and opt to receive email notifications when they are tagged in discussions.
The @mentions will identify users who match the criteria
You may be wondering how @mentions could enhance your class discussions. Here are a couple of examples:
Example 1:
@Mentions can help thread together concepts from multiple people in a discussion. For example, student A may be reading through discussion posts and sees that fellow classmates (Jayne and Francis) are making similar points in their posts but they are coming from completely different starting points. Student A wants to draw Jayne and Francis into a conversation with each other. Student A could post something like, "Hey @Jayne, did you see that @Francis agrees with you on x and y, but starts with presupposition b instead of a? What do you think about his presupposition?" Both Jayne and Francis would receive notification that they have been tagged in the discussion. Likewise, you as the instructor, could use the @mentions to tag students to draw them into a conversation.
Example 2:
You have a student that wants to draw you, as the instructor, into the conversation for clarification. The student could use the @mentions to tag you. You would receive notification alerting you that you have been tagged and you could prioritize responding to that thread before reading through all the others.
Do you have other examples of how @mentions could be useful in discussions? If so, please leave a comment on this post.
Tagged users receive notification in the minibar
Follow these steps to do it.
To use @mentions in a discussion:
Navigate to the forum topic or thread where you want to use @mentions.
Post as normal by selecting Reply to Thread or Start a New Thread.
To tag a user, type @ and begin typing their first or last name.
The user will appear on a list under the text. Select the user to tag them.
The @mention will display the user's first and last name.
Note: Are you doing something innovative in Brightspace or perhaps you've discovered a handy tip? Share how you are using Brightspace in your teaching and learning in The Orange Room.
